File Separation - Kyocera TASKalfa 250ci Operation Manual

Ready to send.
Place original.
File Format
Place original.
Original : ---
Zoom : 100%
Paper : ---
Preview
Add Shortcut
Status

File Separation

Create several files by dividing scanned original data page by page, and send the files.
Use the procedure below to split scanned original data into separate files when sending scanned originals.
Ready to send.
Place original.

File Separation

Place original.
Original : ---
Zoom : 100%
Paper : ---
Preview
Add Shortcut
Status
OPERATION GUIDE
Downloaded From ManualsPrinter.com Manuals
Image Quality
PDF
TIFF
Compression Standard
Ratio Priority
JPEG
XPS
High Comp.
PDF
Cancel
Create and send a file for each page
of the original that was read.
Off Each Page
Cancel
When the color mode in scanning has been
Destination
selected for Grayscale or Full Color, set the image
quality.
If you selected [PDF] or [High Comp. PDF], press
Quality
[Encryption] and specify the encryption settings.
Priority
Off
Encryption
OK
10/10/2008 10:10
5
Press [OK].
6
Specify the destination, and press the Start key to
start sending.
1
Press the Send key.
2
Place the originals on the platen.
3
Press [Original/Sending Data Format] and then
[File Separation].
4
Press [Each Page] to set File Separation.
Destination
1
5
Press [OK].
6
Specify the destination, and press the Start key.
The scanned original is sent after being divided into
files of one page each.
NOTE:
Three-digit serial number such as
abc_001.pdf, abc_002.pdf... is attached to the end of
OK
the file name.
10/10/2008 10:10
Sending Functions
5
5-15