Kyocera TASKalfa 250ci Operation Manual page 320

Default Setting (System Menu)
Paper feed
direction
The table below shows the available settings.
NOTE:
Using Correcting Fine Black Line can impair reproduction of fine characters. It is recommended to
keep the default ([Off]).
Use the procedure below to specify the setting for correcting fine black lines.
System Initialization
Initialize the hard disk mounted on the machine to return to the default mode.
Refer to System Initialization on page 8-87 about the initialization procedures.
Display Brightness
Set the brightness of the touch panel.
8-56
Downloaded From ManualsPrinter.com Manuals
Item
Off
On(Low)
On(High)
Description
No correction performed.
Correction performed. The reproduction of
the image becomes lower when using Off.
Correction performed. Select this item if
black streak remains after using On (Low).
The reproduction of the image becomes
lower when using On (Low).
1
Press the System Menu key.
2
Press [ ], [Adjustment/Maintenance] and
[Change] of Correcting Black Line.
3
Press [Off], [On(Low)] or [On(High)].
4
Press [OK].
OPERATION GUIDE