Kyocera TASKalfa 250ci Operation Manual page 279

Switching Unit of Measurement
Select inch or metric for the unit for paper dimensions.
Use the procedure below to change the input units.
Error Handling
Select whether to cancel or continue the job when error has occurred. The possible errors and what to do for
the errors are as follows.
Duplexing Error
Select what to do when duplex printing is not possible for the selected paper size and media type.
Finishing Error
Select alternative actions when finishing (stapling or offsetting) is not available for the selected paper size or
media type.
OPERATION GUIDE
Downloaded From ManualsPrinter.com Manuals
Item
1-sided
Display Error
Processing
Ignore
Display Error
1
Press the System Menu key.
2
Press [Common Settings] and then [Change] of
Measurement.
3
Select [mm] for metric or [inch] for inch.
4
Press [OK].
Description
Printed in 1-sided
Error message to cancel printing is
displayed.
Description
The setting is ignored and the job is
printed.
Error message to cancel printing is
displayed.
Default Setting (System Menu)
8
8-15