Sending Size Selection - Kyocera TASKalfa 250ci Operation Manual

Sending Functions

Sending Size Selection

Select the sending size (the size of image to be sent).
The table below lists the sizes.
Relationship between Original Size, Sending Size, and Zoom
Original Size (page 5-2), Sending Size, and Zoom (page 5-6) are related to each other. Refer to the following
table.
NOTE:
When you select Sending Size that is different from Original Size, and select the Zoom [100%], you
can send the image as the actual size (No Zoom).
Use the procedure below to select the size for transmission when sending scanned images.
5-4
Downloaded From ManualsPrinter.com Manuals
Item Detail
Standard Select from Same
Sizes 1 as Original Size or
Standard Size.
Standard Select from
Sizes 2 standard size
except Standard
Sizes 1.
Others Select from
Hagaki.
Original Size and the size you
wish to send as are
Original Size
Sending Size
Zoom
Size
Inch models: Same as Original Size,
Ledger, Legal, Letter, Statement,
8.5×13.5", Oficio II, 11×15"
Metric models: Same as Original Size,
A3, B4, A4, B5, A5, B6, A6, Folio
Inch models: A3, B4, A4, B5, A5,
B6, A6, Folio, 8K, 16K
Metric models: Ledger, Legal,
Letter, Statement, 8.5×13.5",
Oficio II, 11×15", 8K, 16K
Hagaki, Oufuku Hagaki
the same different
Specify as Specify as
necessary necessary
Select [Same as Select the
Original] required size
Select [100%] Select [Auto]
(or [Auto])
1
Press the Send Key.
2
Place the originals on the platen.
3
Press [Original/Sending Data Format] and then
[Sending Size].
OPERATION GUIDE