Kyocera TASKalfa 250ci Operation Manual page 276

Default Setting (System Menu)
Use the procedure below to set automatic detection of originals.
Media for Auto Selection (Color/B&W)
Select a default media type for auto paper selection when [Auto] is selected of Paper Selection. If Plain is
selected, the paper source with plain paper loaded in the specific size is selected. Select [All Media Types] for
the paper source with any kind of paper loaded in the specific size.
NOTE:
Default media types can be set for both Color and Black and White.
Use the procedure below to select the paper size and media type used by Auto Selection.
Paper Source for Cover Paper
Select paper source for cover paper from Cassette 1-4 or Multi Purpose Tray. Cover is used for Booklet (see
page 4-29) and Cover (see page 4-32) modes.
NOTE:
[Cassette 3] is displayed when either of the optional paper feeder or 3,000 sheet paper feeder is
installed, and [Cassette 4] is displayed when the optional paper feeder is installed.
Use the procedure below to select the paper source for the cover.
8-12
Downloaded From ManualsPrinter.com Manuals
Item
11x15"
Description
Select the 11×15" size for automatic
detection.
1
Press the System Menu key.
2
Press [Common Settings], [Next] of Original /
Paper Settings and then [Change] of Original Auto
Detect.
3
Select [A6] or [Hagaki] of A6/Hagaki.
Select [Off] to disable automatic detection or [On]
to enable automatic detection of Folio and 11x15"
respectively.
4
Press [OK].
1
Press the System Menu key.
2
Press [Common Settings], [Next] of Original /
Paper Settings and then [Change] of Media for
Auto (Color) or Media for Auto (B & W).
3
Select [All Media Types] or any media type for
paper selection.
4
Press [OK].
1
Press the System Menu key.
OPERATION GUIDE