Kyocera TASKalfa 250ci Operation Manual page 92

Basic Operation
Ready to copy.
Duplex
1-sided
>>1-sided
1-sided
Place original.
>>2-sided
2-sided
>>1-sided
2-sided
>>2-sided
Original : ---
Book
:
Zoom
100%
>>1-sided
Paper : ---
Book
Preview
>>2-sided
Add Shortcut
Status
Collate/Offset Copying
The machine can collate and offset at the same time as it copies.
You can use the Collate/Offset copy function for tasks such as those shown below.
Collate
3-20
Downloaded From ManualsPrinter.com Manuals
Original
Binding Binding
Left/Right Top
Cancel
3
3
2 2
1
1
3
2
1
Original Copy
5
If you choose [1-sided>>2-sided] or
[2-sided>>2-sided], select the binding edge of the
finished copies of Finishing.
If you choose [Book>>2-sided], press [Book>>2-
sided] or [Book>> Book] of Finishing to select the
setting for duplex.
6
If you choose [2-sided>>1-sided],
Copies
[2-sided>>2-sided], [Book>>1-sided] or
[Book>>2-sided], select the binding edge of the
originals of Original.
Top Edge Top
Original
Orientation
OK
10/10/2008 10:10
7
Press [Original Orientation] to select orientation of
the originals, either [Top Edge Top] or [Top Edge
Left]. Then press [OK].
8
Press [OK].
9
Press the Start key.
Once an original placed on the platen is scanned,
replace it with the next one. Then, press the Start
key.
After scanning all originals, press [Finish Scan] to
start copying.
Scan multiple originals and deliver complete sets of
3
copies as required according to page number.
2
1
OPERATION GUIDE