Kyocera TASKalfa 250ci Operation Manual page 286

Default Setting (System Menu)
Color Selection (Copy)
Select the default copying color mode setting. The available default settings are shown below.
Use the procedure below to select the default color mode setting.
Color Selection (Send/Store)
Select the default color mode for scanning documents. The available default settings are shown below.
8-22
Downloaded From ManualsPrinter.com Manuals
Color mode
Auto Color
Full Color
Black & White
Color mode
Auto Color (Color/Gray)
Auto Color (Color/
B & W)
Full Color
Grayscale
Black & White
Description
Automatically recognize whether
documents are color or black and white.
Scan document in full color.
Scan document in black and white.
1
Press the System Menu key.
2
Press [Common Settings], [
Defaults and then [Change] of mode Color
Selection(Copy).
3
Select the default color setting.
4
Press [OK].
Description
Automatically recognize whether the
document is color or black and white, and
scan color documents in Full Color and
black and white documents in Grayscale.
Automatically recognize whether the
document is color or black and white, and
scan color documents in Full Color and
black and white documents in Black and
White.
Scan document in full color.
Scan document in grayscale for smoother
and finer finish.
Scan document in black and white. File
size is smaller than Full Color or Grayscale.
], [Next] of Function
OPERATION GUIDE