Alarm Notification - Toshiba IPEDGE User Manual

Set Advisory Message
Clear Registered
Message
Display Preset
Advisory Messages

Alarm Notification

IPedge UG 12/15
Table 3-1.
Advisory Message Default Code Table
Msg No. Characters Displayed
RETURN ON________
4
5
6
7
8
9
Advisory Messages may only be set using an IP5000-series telephone. The
preset advisory messages can be displayed using the Enterprise Manager.
1. Go off-hook or press your extension button to get a dial tone.
2. Press #411
3. Enter Message number (see table above)
4. Enter additional digits if required.
5. Go on-hook or press Spkr to release the line.
1. Go off-hook or press your extension button to hear the dial tone.
2. Press #412.
3. Go on-hook or press Spkr to release the line.
1. Login to Enterprise Manager.
2. Select System Info then the Advisory Message tab.
The Alarm Notification Button must be set up by your System Administrator on
your station.
When the Alarm Notification button displays
Call your System Administrator.
•
This button stops displaying when the alarm clears or when you press the flashing
button. If the alarm has not been cleared the Alarm Notification Button flashes
every 10 minutes.
TOSHIBA
IPedge
Feature Operations
Additional Digits
Date (e.g. 10 20)
37