Making A Call; Handset; Spkr Button; Hot Dialing - Toshiba IPEDGE User Manual

Making a Call

Handset

Spkr Button

Hot Dialing

Dial Directory

IPedge UG 12/15
There are three ways to originate a call from the telephone:
1. To make a call, lift the handset, then dial the number.
A line may be automatically selected or choose a line manually. Dial tone is heard
through the handset. The Speaker and Microphone LEDs do not light.
Digits display as they are dialed. Call progress tones (Ringback Tone, Busy Tone,
etc.) are heard through the handset.
2. When connected, continue using the handset or switch to speakerphone by
holding down Spkr and placing the handset in the cradle.
1. To make a call, press Spkr.
A line may be selected automatically or choose a line manually. The extension or
Line button lights (depending on system programming). Dial tone is heard
through the speaker. The Speaker and Microphone LEDs light.
2. Dial the number.
Digits display as they are dialed. Call progress tones (Ringback Tone, Busy Tone,
etc.) are heard through the speaker.
When connected, continue using the speakerphone or lift the handset to continue
the conversation.
1. To make a call using Hot Dialing, start dialing the number.
The extension button, Spkr and Mic LEDs light. Digits display as they are dialed.
Call progress tones (Ringback Tone, Busy Tone, etc.) are heard through the
speaker.
2. When connected, continue using the speakerphone or lift the handset to
continue the conversation.
Calls can be made by selecting a name from the alphabetical telephone directory.
To access the Directory
1. Press DIR soft key (shown
right).
Select Directory menu
appears.
The soft keys on the Select
Directory are:
My = Personal Speed Dial Names
EXTR = System Speed Dial
Names
INTR = Directory Number Names
Dial = Cancel directory, get dial tone.
2. Choose the directory you wish to access and use the dial pad to enter the
name.
TOSHIBA
TOM EDISON
APR 05 WEDNESDAY
DIR
4 Line LCD Display
IPedge
The Basics
NO.2004
1:01PM
21