Toshiba IPEDGE User Manual page 61

Do Not Disturb
Override
Executive Override
Destination
Restriction/Traveling
Class Override
Class of Service
Override
IPedge UG 12/15
muted rings until the call is answered. This option applies to the station receiving
the muted ring. The muted ring can be sent to the telephone speaker or to the
telephone handset/headset and speaker.
To use Busy Override
After reaching a busy station, press 2. A muted tone is heard at the busy
•
station, indicating that a call is waiting. The station number displays.
Do Not Disturb (DND) Override lets you send a call waiting tone or ringing to a
station in DND mode to indicate that a call is coming in. Your telephone may be
programmed to block DND Override from other telephones. Your station's LCD
shows that the station you have called is in the DND mode.
OCA is possible to DND stations from stations that are programmed for DND
Override.
To use DND Override
After reaching a station in DND mode, press 2. A tone signal is heard at the
•
DND station, indicating a call is coming in. On your station, the LCD shows
the station number you have overridden.
Your LCD displays DND OVR DENY if the station you called denies DND
Override.
Executive Override enables you to enter an established conversation. Your
telephone can also be programmed to block Executive Override from other
telephones.
To perform Executive Override
After reaching a busy station, press 3
•
Or, if you have an LCD telephone, use the OVRD Soft Key. You enter a
conference with the busy station and the party to whom he was talking.
The called parties may hear an optional tone signal prior to your entering
the conversation.
Your LCD displays EXEC OVR DENY if the station you called denies
Executive Override. If you do not have Override privileges, you will camp
on.
Enables a station user to override the Destination Restriction or Traveling Class of
a particular telephone by entering a pre-determined account code.
To use Destination Restriction or Traveling Class Override
1. Press #471. A Confirmation tone plays and the LCD shows "Enter OVR
Code."
2. Enter the trunk access code or LCR access code.
3. Dial the external telephone number.
By dialing a Class of Service (COS) Override code, a user can change a station's
set of privileges to one associated with the override code. When the call is
terminated and another is attempted from the same station, the original COS is
TOSHIBA
IPedge
Feature Operations
57