Voice Mail; Account Code - Toshiba IPEDGE User Manual

Voice Mail

Account Code

Table 14 Account Code Data
F
IELD
Account Code
DRL
IPedge UG 12/15
You can modify your Voice Mail settings using this screen.
1. Make the appropriate changes.
2. Click the Save button.
Using this menu, you can make changes to the following:
Change the Message Waiting light for the mailbox.
•
Time zones in which the user normally uses the mailbox.
•
Change your voice mail password.
•
Click on the Question bubble for Help information relating to the different
•
parameters.
Call Screening
•
Follow Me
•
Set up the mailbox to make wake-up calls
•
Account Codes can be used for a variety of reasons including billing, tracking,
and line restriction applications. Account Codes are assigned in the system as
a fixed length (default is six digits) and are recorded by the system, along with
the details of the calls, which can be printed on a Station Message Detail
Recording (SMDR) report.
The list of accounting codes that can be verified is limited to 800. Each code
entered may be flagged whether it is to be used for verification prior to the call
be placed or whether it is used for changing the restriction level for that call or
both.
D
ESCRIPTION
Enter the code to be used as a valid accounting code that the user will be
expected to dial. The Registered Digit Length (FB02) must be greater than or
equal to the Verified Digit Length (FB01).
Possible values: 4~15 (default = 6)
This option allows a station user change the DRL assigned to the station (in
Prg.200/260 etc.) by dialing an account code. The DRL of the an account code
will be applied to a call when this Verified Account Code is entered.
Possible values: 0~16 (default = 0)
Notes:
If 0 is set, the DRL of the station will not change when the station dials the
account code - in this case the DRL set for the station in Prg 200/260 etc. will be
applied to the call even if the station dials the account code.
1f 1~16 is set, the DRL of the station will change to the DRL selected here when
the station dials the account code - in this case the DRL set for the station in Prg
200/260 etc.will be overridden to the call.
TOSHIBA
IPedge
IPedge Enterprise Manager
133