Paging - Toshiba IPEDGE User Manual

Hide thumbs Also See for IPEDGE:
Table of Contents

Advertisement

IPedge
Feature Operations
Privacy Override

Paging

Answering a Page
58
applied. This allows selected users to override restrictions that are placed on
any telephone in the system.
To perform Class of Service Override
1. Access a Primary or Phantom DN. You hear a dial tone and the LED
flashes at the in-use rate.
2. Press #471. Dial tone stops. Your LCD prompts you to enter a code.
3. Enter the COS Override Code (four digits). You hear a dial tone.
4. Dial a telephone number.
For security reasons, the override codes are only available on a
Note:
selected basis. See your System Administrator.
This feature enables you to enter an established call on a line you share with
another telephone. Up to two station users can enter an existing Central
Office (CO) line-to-station call (i.e., up to three stations can be connected to a
CO line). You can also use this feature if the station that is already connected
to the CO line is in the Privacy Release mode.
Station users with Privacy Release can allow stations with the shared
button appearance to enter their conversations, even if the station entering
the conversation is not programmed for Privacy Override.
Station users may make page announcements to telephones. Check with
your system administrator to find out the zone numbers for various paging
groups. Verify with your system administrator if there are sufficient vacant
media resources for successful paging.
To make a Page announcement to telephones:
1. Lift the handset, press your extension button and enter a paging access
code.
2. Make your announcement, then hang up.
To make a Group Page
Press Group Page and enter the Group number (01~24)
— or —
Press extension + #31 and enter the zone number.
To answer a page from the paged station, press the page button - do not lift
the handset or press the speaker button. To answer a page from other
stations perform a Directed Terminal Pick up (See Call Pick up). The call must
be picked up before paging ends. When the page is answered, the device
being used at that time will be released.
If a paged station is a member of two paging groups, and is being paged as a
member of one group, and a page is attempted for the second group, that
telephone attempting the page on the second group will receive a busy signal.
The original paging is maintained, except in the case where the second page
TOSHIBA
IPedge UG 12/15

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents