Microphone Cut-Off - Toshiba IPEDGE User Manual

Hide thumbs Also See for IPEDGE:
Table of Contents

Advertisement

Turning On/Off MW
LED on Another
Extension
Microphone Cut-
Off
IPedge UG 12/15
Notes:
If there is a + on the LCD, press the Next Soft Key to scroll through the
messages sent to that extension.
To see who has sent you messages, or to retrieve the messages, press the
flashing Msg button.
When an extension is called, the calling party can choose to send a message to
the called party. This is a notification to say that a call has been missed and the
calling party would like to be called back.
By sending a message to another extension you turn on their Msg LED.
1. Dial an internal extension. You may hear ringing or busy tone.
2. Press Msg or 7. The Msg LED flashes red on the called telephone. At your
telephone, the Msg LED lights steady red and the LCD shows the station
number where the Message Waiting light was sent.
3. If you decide to cancel the Message Waiting light at this point, press Msg or 7
again while ring-over tone is playing and the light will cancel. If you want to
cancel the message later, call the telephone where you set the message and
press 7 twice.
4. Press Spkr. Your Msg LED turns Off. The Msg LED on the called telephone
flashes until the called party presses the flashing Msg button which calls you
back.
5. Turn off the Message LED.
The two ways to turn Off a Message LED are:
Method 1
1. Press #64 plus the extension number that has the message light set.
2. Press Spkr or hang up to end the call.
Method 2
1. Dial the extension that has the Message LED.
2. Press 77.
3. Press Spkr or hang up to release your telephone.
This feature prevents callers from monitoring the sounds near your telephone
when your telephone receives a Handsfree Call or cuts-off the telephone
microphone while on a speakerphone call. When the feature is ON, the
Microphn Cut-off LED lights steady red and the Mic and Spkr LEDs do not light
when your telephone is called. When the feature is OFF, the Microphn Cut-off
LED is not lit and your microphone works. The Microphn Cut-off functions on
Handsfree Answerback and speaker OCA calls for privacy.
To turn the microphone ON/OFF
Microphn Cut-off
Press
TOSHIBA
to toggle between ON/OFF.
IPedge
Feature Operations
55

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents