94 Chapter 2 Network configuration
•
"Stack configurations" on page 98
•
"Redundant cascade stacking feature" on page 102
BayStack 400-ST1 Cascade Module
The front-panel components of the BayStack 400-ST1 Cascade Module are shown
in
Figure
Figure 12 BayStack 400-ST1 Cascade Module front-panel components
2
1 = Blank connectors (unused)
2 = Cascade A Out connector
3 = Unit Select switch
4 = Cascade A In connector
Cascade A Out connector
Provides an attachment point for connecting this unit to another unit via the
cascade cable. A return cable from another unit's Cascade A Out connector to this
unit's Cascade A In connector completes the stack connection (see the example
shown in
208700-B
Note: If you are implementing a mixed stack with the Business Policy
Switch and BayStack 450 and BayStack 410 switches, refer to
Appendixes for configuration and interoperability information.
12. Component descriptions follow the figure.
1
Unit Select
Base
Cascade A Out
3
Figure
13).
Cascade A In
4
BS0031B