Flash Memory Storage; Switch Software Image Storage - Nortel 2000 Using Manual

• You cannot configure EAPOL-based security on ports that are currently
configured for:
— Shared segments
— MultiLink Trunking
— MAC address-based security
— IGMP (Static Router Ports)
— Port mirroring
• You can connect only a single client on each port that is configured for
EAPOL-based security. (If you attempt to add additional ports to a port, that
port goes to Blocking mode.)
EAPOL-based security uses the RADIUS protocol to authenticate local console,
Telnet, and EAPOL-authorized logins. Refer to
security" on page 70

Flash memory storage

Switch software image storage

The Business Policy Switch uses flash memory to store the switch software
image. The flash memory allows you to update the software image with a newer
version without changing the switch hardware (see Chapter 3). An in-band
connection between the switch and the TFTP load host is required to download the
software image.
for more information on using the RADIUS protocol.
Using the Business Policy Switch 2000 Version 1.2
"RADIUS-based network
76