Figure 90 Spanning Tree Group Configuration; Table 45 Spanning Tree Group Configuration Parameters - Nortel 2000 Using Manual

Figure 90 Spanning Tree Group Configuration

Use space bar to display choices, press <Return> or <Enter> to select
choice. Press Ctrl-R to return to previous menu.
to Main Menu.
Table 45

Table 45 Spanning Tree Group Configuration parameters

Parameter Description
Create STP Allows you to create a spanning tree group.
Group
Default Value
Range
Delete STP Allows you to delete a spanning tree group.
Group
Default Value
Range
Spanning Tree Group Configuration
Create STP Group:
Delete STP Group:
Bridge Priority:
Bridge Hello Time:
Bridge Max. Age Time:
Bridge Forward Delay Time:
Add VLAN Membership:
Delete VLAN Membership:
Tagged BPDU on tagged port:
STP Group State:
describes the Spanning Tree Group Configuration parameters.
1
1 to 8
Blank
1 to 8; only created STP Groups are available
Chapter 3 Using the console interface 243
[ 1 ]
[ ]
[ 8000 ]
[ 2 seconds ]
[ 20 seconds ]
[ 15 seconds ]
[ 1 ]
[ ]
[ No ]
[ Active
Press Ctrl-C to return
Using the Business Policy Switch 2000 Version 1.2
]