Spanning Tree Configuration Menu Screen; Figure 88 Hardware Unit Information Screen - Nortel 2000 Using Manual

Figure 88 Hardware Unit Information screen

Switch Model
----------------
Unit #1 BPS 2000
Unit #2 BPS 2000
Press Ctrl-R to return to previous menu.
Menu.

Spanning Tree Configuration Menu screen

The Spanning Tree Configuration Menu screen
spanning tree parameters and configure multiple spanning tree groups (STGs).
To open the Spanning Tree Configuration Menu screen:
➨
Hardware Unit Information
MDA Model
---------
None
None
Note: Before configuring spanning tree groups, refer to Chapters 1 and
2 for guidelines and interactions with VLANs and MLT.
Note: You must use either the Command Line Interface (CLI) or Device
Manager (DM) if you want to configure individual port values for path
cost and priority.
Choose Spanning Tree Configuration (or press p) from the main menu.
Cascade MDA
-----------
400-ST1
400-ST1
Press Ctrl-C to return to Main
(Figure 89) allows you to view
Software Version
----------------
v.1.2.0.0
v.1.2.0.0