Table 25 Reserved Pids - Nortel 2000 Using Manual

User-Defined Protocol Identifier Description
In addition to the standard predefined protocols, user-defined protocol-based
VLANs are supported. For user-defined protocol-based VLANs, you specify the
protocol identifier (PID) for the VLAN. Any frames that match the specified PID
in any of the following ways are assigned to that user-defined VLAN:
• The ethertype for Ethernet type 2 frames
• The PID in Ethernet SNAP frames
• The DSAP or SSAP value in Ethernet 802.2 frames
The following PIDs (Table
PIDs.

Table 25 Reserved PIDs

PID Value (hex)
04**, **04
F0**, **F0
AAAA
0 - 05DC
0600, 0807
0BAD
4242
6000 - 6009, 8038
0800, 0806
8035
809B, 80F3
8100
8137, 8138
80D5
86DD
8808
Ipx 802.3
Ipx 802.2
Chapter 3 Using the console interface 195
25) are reserved and are not available for user-defined
Comments
Sna 802.2
NetBIOS 802.2
SNAP
Overlaps with 802.3 frame length
Xns Ether2
Vines Ether2
IEEE 802.1D BPDUs
Dec
Ip Ether2 (including ARP)
RARP Ether2
AplTk Ether2Snap
IEEE 802.1Q for tagged frames
Ipx
SNA Ether2
Ipv6 Ether2
Ipx 802.3
Ethernet 802.2
Ethernet 802.
Using the Business Policy Switch 2000 Version 1.2