Table of Contents
Advertisement
Copyright © 2006 Nortel Networks
Figure 17 Application server IPMP configuration summary
14
15
16
17
NN10364-301 MCS 5100 3.5 Standard 6.0 December 2006
Is this IPMP group configuration acceptable?
(Y/N)
Select Y to accept or N to change.
The default route IP address should appear. If correct, press
Enter. Otherwise, type it in, then press Enter.
Note: If your configuration does not include a router, then
enter the machine logical IP address of your server.
Do you intend to deploy the Web Server to this
machine (y,n)? Enter Y.
You are now configuring the Syslog Daemon. Press
Enter to continue.
Does the Management Server have a SysMgr Service
Logical IP Address [Y/N]? Select N.
The system will now reboot.
If you are not prompted for CD5, contact support.
62
ATTENTION
Advertisement
Table of Contents
