Table of Contents
Advertisement
Copyright © 2006 Nortel Networks
9
10
NN10364-301 MCS 5100 3.5 Standard 6.0 December 2006
Follow the instructions for installing Disk 4 in this document.
After step
13
in the instructions for installing the DBSvr1 or
DVSvr2, you will see the following:
Follow the instructions below as shown in this message that
appears on your machine:
Starting Oracle Intelligent Agent....
Agent started
##################################################
#
#
Important Notice !!!!!!
#
# Your data base is replicated
# To make the replication work you must execute the
# following steps:
#
# (1) Log in as oracle to the replicated (other) DB
#
machine
#
# (2) issue the command
#
configure_replication
#
# (3) restart the database
#
##################################################
Press the Enter key to continue ----
Note: When you perform this procedure on an
IPCM/WCM/Prov machine, you will not be asked about
deploying a Provisioning Module to that server.
Execute the following steps before deploying any components.
To set the SysMgr and AcctMgr Service Logical IP addresses,
a Log in as root to the Management server and type in the
following command:
#/usr/local/bin/Interface.pl add sysmgr
172
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
Advertisement
Table of Contents
