Nortel Sun Fire V100 Installation And Commissioning Manual page 49

Copyright © 2006 Nortel Networks
Network Connectivity/Networked
3
DHCP/Use DHCP
4
Primary Network Interface /Primary Network Interface
5
Host name/Host name
6
IP Address
7
Subnets/System part of a subnet
8
MCS 2-server Sun Fire V100 Solaris Installation and Commissioning Guide
Accept the default Yes by pressing Esc+2 to continue.
Accept the default No by pressing Esc+2 to continue.
Accept the default dmfe0 interface by pressing Esc+2 to
continue.
Enter the host name of the server, for example: micromgmt
Note 1: Host name cannot start with a number. Host names
must be at least two characters and can contain alphanumeric
characters and minus signs (-).
Note 2: Host names must be unique within your domain.
Creating a duplicate host name will cause problems on the
network after you install Solaris.
Press Esc+2 to continue.
Make sure you enter the machine logical IP address for this
system. It must be unique and follow your site's address
conventions.
Enter the machine logical IP address.
Example: 120.120.13.25
Press Esc+2 to continue.
Accept the default Yes by pressing Esc+2 to continue.
49
ATTENTION