Table of Contents
Advertisement
Copyright © 2006 Nortel Networks
7
8
MCS 2-server Sun Fire V100 Solaris Installation and Commissioning Guide
Type the number of your choice and press Return:
Select 2 and press Enter.
See the instructions for installing Disk 1 in this document for
more information on what to enter for the following items:
•
Networked
•
DHCP
•
Primary Network Interface
•
Hostname (You may have to backspace over the word
"unknown" and type in the correct name.)
•
IP Address
•
Subnet
•
Netmask
•
iPV6
•
Confirm
•
Security Policy
•
Confirm
Note: This procedure skips some of the steps for initial
installation of CD1.
•
Regions
•
Time Zone
•
Date & Time
•
Confirm
•
Password
You will then see System identification is completed.
The system reboots. You can log back in as root.
At the MgmtSvr, you will see the following message:
You are now configuring the NTP time source for
this server. The servers which run the
Management and Accounting service will be the
source. You will need to provide the Machine
Logical IP Address of each server. If running
simplex mode, provide the same address twice.
Press the Enter Key to Continue --
171
Advertisement
Table of Contents
