Copyright © 2006 Nortel Networks
Table 17 IP Client Manager tab (Sheet 2 of 2)
Parameter
Phase 1 Firmware ID
Phase 2 Firmware ID
Use UFTP
UFTP Server Port
Keep Alive Timer
KA Phone Timer
Switch Server Delay
Min ReReg Delay
Max # Reg Attempts
Server Recovery
Time Min
Server Recovery
Time Max
2
Table 18 Database Base tab
Parameter
Primary Host
Connections
Secondary Host
3
MCS 2-server Sun Fire V100 Solaris Installation and Commissioning Guide
Recommended Value Notes
B60
D61
checked
50020
40
90
5000
60000
25
1
5
Use the values from the table that follows to complete the
Database Base tab parameters.
The shaded rows indicate values that must be addressed by the
installer.
Recommended value
<machine logical IP address of
the primary database server>
5
<blank>
Use the values from the table that follows to complete the
UNIStim Base tab parameters.
121
Box is checked.
Notes
Leave blank
Example
default
default
default
default
default
default
default
default
default
default
default
Example
192.168.14.21
120.120.13.22
default
default