Table of Contents
Advertisement
Copyright © 2006 Nortel Networks
Procedure 31 Configuring the SIP Application Module tabs
At the System Management Console,
1
Table 2 Authentication tab (Sheet 1 of 2)
Parameter
Authorized SIP Nodes
Private Key
NN10364-301 MCS 5100 3.5 Standard 6.0 December 2006
Do not click Apply until you have FINISHED configuring all the
tabs.
Use the values from the following table to enter into the
Authentication tab parameters.
Recommended
value
<IP addresses of
other trusted
application servers,
conference servers,
and gateways this
application module
interacts with. A
trusted relationship
implies that this
endpoint will not be
authenticated by the
application module.
Also, trust can be
applied to nodes
that cannot perform
user authentication,
like conference
servers and
gateways.>
MCP
108
ATTENTION
Notes
Enter
addresses
individually.
Example
Enter IPs of any
gateways or
conference servers
being used. Also,
enter the public
machine logical IPs
of any IPCMs being
used.
Note: Do not put in
any WiCM servers,
since they are not
trusted nodes.
default
Advertisement
Table of Contents
