Nortel Sun Fire V100 Installation And Commissioning Manual page 48

Copyright © 2006 Nortel Networks
2
Select a Language
3
Select a locale
4
What type of terminal are you using?
5
Note: The following message is displayed: The system is
coming up. Please wait.
Solaris Installation Program Page
1
2
NN10364-301 MCS 5100 3.5 Standard 6.0 December 2006
Make sure you put spaces before and after the hyphen: boot
[space] cdrom [space] - [space] install.
At the >ok prompt, boot the system: boot cdrom - install
[Enter]
Note 1: For instructions on how to get to the >ok prompt, see
Powering on the servers on page
Note 2: You must wait several minutes before information
begins to appear.
To select zero [0] for English,
0 [Enter]
To select zero [0] for English,
0 [Enter]
Select three [3] for DEC VT100,
3 [Enter]
Ignore any time zone and syntax errors you receive. You will set
the time zone and additional information in the next procedure.
Press Esc, then press the number 2 [Esc+2] to continue.
Note: If you are using a direct console connection to the SUN
terminal, use the F2 key.
Press Esc+2 to continue.
48
ATTENTION
45.
ATTENTION