Show Ports Stats Pos Linkstatus; Figure 43 Show Ports Stats Pos Linkstatus Command Output; Table 44 Information Fields For Output Of The Show Ports Stats Pos Linkstatus Command - Nortel Passport 8683POS Using Manual

114 Chapter 6 Command line interface

show ports stats pos linkstatus

This command displays current statistics
the PPP link. The command uses the syntax:
show ports stats pos linkstatus [<ports>]

Figure 43 show ports stats pos linkstatus command output

Passport-8610:5/show/ports/stats/pos# linkstatus
=========================================================================
=========================================================================
PORT BAD ADDR
NUM FRAMES
-------------------------------------------------------------------------
10/1 0
10/3 0
Passport-8610:5/show/ports/stats/pos#
Table 44
pos linkstatus
Table 44 Information fields for output of the show ports stats pos linkstatus
command
Field
PORT NUM
BAD ADDR FRAMES
BAD CNTL FRAMES
TOO LONG FRAMES
BAD FCS FRAMES
MRU
209564-A
POS Link Stats
BAD CNTL TOO LONG
FRAMES FRAMES
0 0
0 0
describes the information fields for output of the show ports
command.
Description
Port number.
Number of packets received with an Incorrect Address Field.
This counter is a Component of the ifInErrors variable that is
associated with the interface that represents this PPP Link.
Number of packets received on this link with an incorrect
address field.
Number of packets received and discarded because their
length exceeded the MRU.
Number of packets received with an incorrect FCS size.
Maximum Receive Unit
(Figure 43) on the frames coming across
BAD FCS
FRAMES MRU
1936 1936
0 0
stats