Table of Contents
Advertisement
104
Chapter 6 Command line interface
Table 36 Information fields for output of the show ports info pos all
command (continued)
Field
MRU
FCS SIZE
IPX ROUTE PROTOCOL
LQR-QUAL THRESHOLD
LQR-QUAL PERIOD
REMOTE IP
IPX NET ADDR
STATUS OPERATE
LCP STATUS
BRIDGE STATUS
IP STATUS
IPX STATUS
PPP LQSTATUS
show ports stats pos activealarms
This command displays active alarms on the Passport 8683POS Module port. The
command uses the syntax:
show ports stats pos activealarms
Figure 36
command.
209564-A
Description
Size (in octets) of the largest packet that can be sent or
received on the interface. For IPCP and IPXCP, the
maximum is 1936. When BCP is enabled, however, the
maximum is 1934. Check which NCP is enabled before
configuring the Mru.
Note: The Bridge Control Protocol (BCP) is enabled on the
Passport 8683POS Module by default.
Sets the length of the redundancy check (fcs) to either 32
or 16.
Sets the protocol for IPX routing.
Indicates the link quality reporting threshold.
Indicates the link quality reporting interval.
Indicates the remote iP address.
Indicates the IPX net address.
Operational status.
Link Control Protocol status.
Bridging status.
Routing (IP) status.
Routing (IPX) status
Point-to-Point status
shows output for the show ports stats pos activealarms
<ports>
[
]
Advertisement
Table of Contents
