Show Ports Stats Pos Fepathinterval; Table 40 Information Fields For Output Of The Show Ports Stats Pos Fepathcurrent Command - Nortel Passport 8683POS Using Manual

Table 40 describes the information fields for output of the show ports
pos fepathcurrent
Table 40 Information fields for output of the show ports stats pos fepathcurrent
command
Field
PORT NUM
ERRORED SECONDS
COUNT (ES)
SEVERELY ERRORED
COUNT (SES)
CODE VIOLATION COUNT
(CV-P)
UNAVAILABLE SECONDS
(UAS)

show ports stats pos fepathinterval

This command displays statistics
interval. You specify the interval or span of intervals to display. The command
uses the syntax:
show ports stats pos fepathinterval <intervalid>
Chapter 6 Command line interface
command.
Description
Port number.
Errored Second (ES) is a second with one or more Coding
Violations (CV) or one or more incoming defects (for
example, SEF, LOS, AIS, LOP).
Severely Errored Second (SES) is a second with x or more
CVs, or one or more incoming defects.
Coding Violations (CV) are Bit Interleaved Parity (BIP)
errors that are detected in the incoming signal. CV
counters are incremented for each BIP error detected.
Number of seconds that the interface is unavailable.
(Figure 40) on the far end path over a 15-minute
Using the Passport 8683POS Module
109
stats
<ports>
[ ]