Table of Contents
Advertisement
112
Chapter 6 Command line interface
Table 42 Information fields for output of the show ports stats pos linecurrent
command
Field
PORT NUM
ERRORED SECONDS
COUNT (ES)
SEVERELY ERRORED
COUNT (SES)
CODE VIOLATION COUNT
(CV-P)
UNAVAILABLE SECONDS
(UAS)
STATUS
show ports stats pos lineinterval
This command displays statistics
interval. You can specify any interval or span of intervals. The command uses the
syntax:
show ports stats pos lineinterval <intervalid>
209564-A
Description
Port number.
Errored Second (ES) is a second with one or more Coding
Violations (CV) or one or more incoming defects (for
example, SEF, LOS, AIS, LOP).
Severely Errored Second (SES) is a second with x or more
CVs, or one or more incoming defects.
Coding Violations (CV) are Bit Interleaved Parity (BIP)
errors that are detected in the incoming signal. CV
counters are incremented for each BIP error detected.
Number of seconds that the interface is unavailable.
Status of defects.
(Figure
42) for the line over a 15-minute
[
<ports>
]
Advertisement
Table of Contents
