Table of Contents
Advertisement
.
Table 36 Information fields for output of the show ports info pos all
command
Field
PORT NUM
FRAMING MODE
CLOCK SOURCE
SECTION TRACE
SIGNAL LABEL
SCRAMBLE
ADMIN STATUS
BRIDGE ADMIN
IP ADMIN
IPX ADMIN
MAGIC NUMBER
STPMODE
PPP LQSTATUS
SPEED
Chapter 6 Command line interface
Description
Port number.
Indicates whether the framing mode is either:
•
sonet
•
sdh
Indicates whether the clock source is either:
•
line
•
internal
Indicates the integer that the section trace flag (j0) is set to.
Operational value of Path Signal Label (C2). The signal
label value is reset when the scramble value is changed.
Enables or disables the scrambling option.
Sets the port to one of the following states:
•
up
•
down
•
testing
This parameter indicates bridged traffic within PPP.
This parameter indicates the IP traffic (link) within PPP.
This parameter indicates the IPX traffic (link) within PPP.
If set to enable, selects a random number ("magic
number") used in loopback detection. enable detects
loopback; disable does not detect loopback.
Spanning Tree Protocol mode - This parameter enables
BPDUs to be received or transmitted with BPDU specific
encapsulation. When disabled, encapsulated within
Ethernet frames.
Sets the link quality reporting interval.
Displays the current operating speed of the port. It can be
either 155 or 622 Mb/s depending on the type of interface
installed.
Using the Passport 8683POS Module
103
Advertisement
Table of Contents
