Figure 40 Show Ports Stats Pos Fepathinterval Command Output; Table 41 Information Fields For Output Of The Show Ports Stats Pos Fepathinterval Command - Nortel Passport 8683POS Using Manual

110 Chapter 6 Command line interface

Figure 40 show ports stats pos fepathinterval command output

Passport-8610:5/show/ports/stats/pos# fepathinterval 1
=========================================================================
=========================================================================
PORT ERRORED SECONDS
NUM COUNT (ES)
------------------------------------------------------------------------
10/1 0
10/3 0
INTERVAL ID = 1
Passport-8610:5/show/ports/stats/pos#
Table 41
pos fepathinterval
Table 41 Information fields for output of the show ports stats pos fepathinterval
command
Field
PORT NUM
ERRORED SECONDS
COUNT (ES)
SEVERELY ERRORED
COUNT (SES)
CODE VIOLATION COUNT
(CV-P)
UNAVAILABLE SECONDS
(UAS)
INTERVAL ID
209564-A
POS Far End Path Interval Stats
SEVERELY ERRORED
COUNT (SES)
0
0
describes the information fields for output of the show ports
command.
Description
Port number.
Errored Second (ES) is a second with one or more Coding
Violations (CV) or one or more incoming defects (for
example, SEF, LOS, AIS, LOP).
Severely Errored Second (SES) is a second with x or more
CVs, or one or more incoming defects.
Coding Violations (CV) are Bit Interleaved Parity (BIP)
errors that are detected in the incoming signal. CV
counters are incremented for each BIP error detected.
Number of seconds that the interface is unavailable.
Specified interval.
CODE VIOLATION
COUNT (CV-P)
0 0
0
UNAVAILABLE
SECONDS(UAS)
900
stats