Answering Calls; Answering A Call; Nn10300-021 02.03 Standard 7 March; Answering A Second Call - Nortel 1110 User Manual

.

Answering calls

Follow these procedures to answer calls. Incoming calls cause the
telephone to ring and the Message Indicator lamp to flash.
The IP Phone 1110 does not have a handsfree feature. You can answer
a call by pressing the Line key, or by picking up the handset. You must
use the handset to speak to the caller. See
components" (page 10)

Answering a call

Follow this procedure to answer a call.

Answering a second call

Follow this procedure to answer a call when you are engaged in a call.
If another call comes in while the primary line is engaged, the phone
sounds and a message indicator icon on the display flashes. While the
indicator is flashing you have the opportunity to put the first call on hold
and answer the second call.
Step
1
2
Copyright © 2007, 2008 Nortel Networks
.
for the location of the Line key.
Action
Perform one of these actions to answer a call:
•
Lift the handset and begin speaking.
•
Press the Line key, then lift the handset and begin speaking.
Action
Press the hold key to put the active call on hold.
Perform one of these actions:

Carrier VoIP

Nortel IP Phone 1110 User Guide (CICM)

NN10300-021 02.03 Standard
7 March 2008
Figure 1 "IP Phone 1110
29