Answering calls
Follow these procedures to answer calls. Incoming calls cause the
telephone to ring and the Message Indicator lamp to flash.
The IP Phone 1110 does not have a handsfree feature. You can answer a
call by pressing the Link key, or by picking up the handset. You must use
the handset to speak to the caller. See
10)
Answering a call
Follow this procedure to answer a call.
Step
1
Answering a second call
Follow this procedure to answer a call when you are engaged in a call.
If another call comes in while the primary line is engaged, the phone sounds
and a message indicator icon on the display flashes. While the indicator is
flashing you have the opportunity to put the first call on hold and answer
the second call.
Step
1
2
Copyright © 2006 , Nortel Networks
.
for the location of the Link key.
Action
Perform one of these actions to answer a call:
•
Lift the handset and begin speaking.
•
Press the Link key, then lift the handset and begin speaking.
Action
Press the hold key to put the active call on hold.
Perform one of these actions:
•
Press the softkey assigned to the line with the incoming call.
Carrier VoIP
Nortel IP Phone 1110 User Guide (CICM)
NN10300-021 1.0 Draft
(I)SN10 30 November 2006
"IP Phone 1110 components" (page
—End—
27
Nortel Networks Confidential