Selecting A Ring Tone; Selecting The Dialpad Feedback; Carrier Voip; Nortel Ip Phone 1110 User Guide (Cicm - Nortel 1110 User Manual

62 Using the Terminal menu

Selecting a ring tone

Follow this procedure to select a ring tone.
Prerequisites
You must have permission to edit your audio profile to perform this
procedure. Permission to edit your audio profile is granted by your system
administrator.
Step
1
2
3
4
5
6

Selecting the dialpad feedback

Follow this procedure to select the sound that the keypad makes when you
press a number button on the dialpad.
You must have permission to edit your dialpad feedback to perform this
procedure. Permission to edit your dialpad feedback is granted by your
system administrator.
Copyright © 2007, 2008 Nortel Networks
.
— Press Cancel to cancel the request.
— Press Reset to reset the volume to the previous level.
— Press Play to hear the level of the currently selected
volume.
— Press Ok, or press the send key, when you have the
volume level you want.
The default volume of the selected speaker is set.
Action
From the main menu, open the Settings menu.
From the Settings menu, open the Terminal menu.
From the Terminal menu, open the Audio menu.
From the Audio menu, select and open Play Ring Patterns.
The list of ring tones opens.
To hear a ring tone before you select it, select one from the list
and press Play. Press Stop to stop the ring tone from playing.
To select a ring tone, press Apply.

Carrier VoIP

Nortel IP Phone 1110 User Guide (CICM)

NN10300-021 02.03 Standard
7 March 2008
--End--
--End--