Carrier Voip; Nortel Ip Phone 1110 User Guide (Cicm - Nortel 1110 User Manual

When a key has two features assignment to it, you can replace one
feature with another with the same profile, without losing the other feature.
Therefore, if Call Forward is assigned to key 1, it replaces Make Set Busy,
but not Call Waiting. The new map looks like this.
Table 6
Example 4: Replace a feature with one with a like profile
Key 2004 feature assignment
2
Three Way Call
3
Call Forward
4 Make Set Busy
5 Busy Override
6
Ring Again
7
Call Waiting
Example 5: Assign a Never hide feature to key already assigned
A feature with a Never hide profile always replaces a feature with a Hide
when idle or Hide when active profile. This example shows what happens
if you assign a feature with a Never hide profile, to key 1.
Table 7
Example 5: Assign a Never hide feature to key already assigned
Key 2004 feature assignment
2 Three Way Call
3 Call Forward
4
Make Set Busy
5
Busy Override
6 Ring Again
7
Call Waiting
Copyright © 2007, 2008 Nortel Networks
.
Feature profile
Hide when idle
Hide when active
Hide when active
Hide when idle
Never hide
Never hide
Feature profile
Hide when idle
Hide when active
Hide when active
Hide when idle
Never hide
Never hide

Carrier VoIP

Nortel IP Phone 1110 User Guide (CICM)

NN10300-021 02.03 Standard
7 March 2008
Softkey assignment 91
1110 softkey assignment
None
1
None
None
None
1
1110 softkey assignment
None
None
None
None
1
None