Using Conference Call; Carrier Voip; Nortel Ip Phone 1110 User Guide (Cicm - Nortel 1110 User Manual

34 While on an active call
Step
1
2
3

Using conference call

Follow this procedure to engage in a conference call.
The Three Way Call (3WC) feature allows you to add three calls to a
conference. If six port conference is available, you can add a maximum of
six calls to a conference. If six port conference is available, 6WC appears
beside a feature key in the display.
Step
1
2
3
4
5
Copyright © 2007, 2008 Nortel Networks
.
Action
During a call, press the key to which the transfer feature is
assigned.
The call is put on hold and a dial tone sounds.
Use the dialpad to enter the number to which to transfer the call.
When that number rings or is answered, press the transfer key
again.
The call is transferred.
Action
During a call, press the key to which the conference call feature
is assigned, either 3WC or 6WC.
The call is put on hold and a dial tone sounds. On the display,
an indicator flashes beside the line on which the call is held.
Dial the number of the person you want to add to the call.
At this time, you can talk privately to the person you are adding,
to announce the conference.
Press the conference key again to merge the calls.
Repeat steps 2 and 3, to add more calls to the conference.
If you make a mistake dialing, or a party does not want to
be included in the conference, press the softkey with the DN
assigned, select the DN from the Call Services list, or press the
line key.

Carrier VoIP

Nortel IP Phone 1110 User Guide (CICM)

NN10300-021 02.03 Standard
7 March 2008
--End--
--End--