Using The Outbox; Accessing The Outbox; Carrier Voip; Nortel Ip Phone 1110 User Guide (Cicm - Nortel 1110 User Manual

.

Using the Outbox

You must assign a Directory Number (DN) key the Outbox before you can
use this feature. After you assign a DN key, the IP Phone logs all outgoing
calls from that DN. The system logs the outgoing key number, time, and
date. If the duration of the call is more than two seconds, the system
captures the display as it appeared when the call was made.
The Outbox can store a maximum of 10 calls. When the maximum is
reached, the oldest call is dropped. Calls appear in the list in order in
which they were made, with the most recent call at the top of the list.
The Outbox call display consists of a time or date stamp and a name or
number. A time stamp appears beside calls you made on the same day on
which you view the Outbox. A date stamp appears beside calls that were
made prior to the day of viewing. If no name or number was extracted from
the display of the outgoing call, the numbered dialed appears. Use the up
and down navigation keys to scroll through the list. The list does not wrap
around.
Follow procedures in this section to use the Outbox feature.
Navigation
•
•
•
•
•

Accessing the Outbox

Follow this procedure to access and use the Outbox.
Copyright © 2007, 2008 Nortel Networks
.
"Accessing the Outbox" (page 83)
"Viewing Outbox call information" (page 84)
"Storing a number from the Outbox" (page 84)
"Using the Outbox to make a call" (page 85)
"Resetting the Outbox" (page 85)

Carrier VoIP

Nortel IP Phone 1110 User Guide (CICM)

NN10300-021 02.03 Standard
7 March 2008
83