Allnet ALL-VPN10 User Manual page 62

Tx Power
Channel Bandwidth
SSID Summary
This function will greatly improve the data transfer rate between WMM-enabled
wireless devices.
WMM AP Parameter Setting
The default value is 100%. To narrow down covering range, users can input a
smaller value.
20- the router will use 20Mhz for data transmission and receiving between the AP
and the stations.
20/40 – the router will use 20Mhz or 40Mhz for data transmission and receiving
according to the station capability.
The status of every SSID will be shown here. Click "Edit" to enter configuration
page.
© ALLNET GmbH München 2013 - All rights reserved
ALL-VPN10 VPN/Firewall WLAN-N WAN Router
62