Related Manuals for Allnet ALL168500
Summary of Contents for Allnet ALL168500
- Page 1 ALL168500 QIG ALL168500 500 Mbps PLC Ethernet Bridge QUICK INSTALLATION GUIDE ALLNET GmbH © 2010 www.allnet.de...
- Page 2 Please read this document before installing the product. O THE NSTALLER This publication contains the following sections: Important safety instructions The first thing you need to know before you begin to install Product installation guide Specification ALLNET GmbH © 2010 www.allnet.de...
-
Page 3: Important Safety Instructions
If the product has been exposed to rain or water. If the product does not operate normally when the operating instructions are followed. If the product exhibits a distinct change in performance. ALLNET GmbH © 2010 www.allnet.de... - Page 4 Pentium® III or better, clock rate faster than 2.0GHz recommended At least one free Ethernet port for ALL168500 500Mbps PLC-Ethernet Bridge 2. Your PC must not be configured for another network. This means that: No network clients except for Microsoft Network*, Client for Netware* Networks, or Microsoft Family Logon* are installed ...
- Page 5 Plug the Bridge into an AC outlet. Plug the provided Ethernet cable into the RJ45 connector of the Bridge and plug the other end of the cable into the Ethernet port on the wireless AP. ALLNET GmbH © 2010 www.allnet.de...
-
Page 6: Specification
Operating : 0~40 ℃ Temperature Environment Storage : -20~60 ℃ Relative Humidity Operating : 10~85% Non-Condensing Storage : 5~90% Non-Condensing 100 ~ 240 VAC 50/60Hz Power Source Power 5W Max (Normal mode) Below 2W (Standby mode) Consumption Certification ALLNET GmbH © 2010 www.allnet.de... - Page 7 It will complete the new private network encryption setting within 10 seconds. You will see the new device’s all LEDs are off and restart after completing the private network setting. The existing private network device’s “PWR” LED become solid. ALLNET GmbH © 2010 www.allnet.de...
- Page 8 Reset the device to the factory default setting: Push the device’s “RESET” button for 1 to 3 seconds. You will see the device’s all LEDs are off and restart. The device’s setting resets to the “factory defaults”. ALLNET GmbH © 2010 www.allnet.de...
- Page 9 Manufacturer: ALLNET GmbH ALLNET Deutschland GmbH Maistrasse 2 82110 Germering Tel. +49 89 894 222 22 Fax +49 89 894 222 33 E-Mail: info@allnet.de ALLNET GmbH © 2010 www.allnet.de...
-
Page 10: Declaration Of Conformity
IEC 61000-4-5:2005 IEC 61000-4-6:2008 IEC 61000-4-8:1993+A1:2000 IEC 61000-4-11:2004 Anschrift: Allnet GmbH Maistraße 2 82110 Germering Germany E-Mail: info@allnet.de support@allnet.de Phone: +49 (0)89 894 222 22 Germering, January 10, 2011 Fax: +49 (0)89 894 222 33 ALLNET GmbH © 2010 www.allnet.de...
Need help?
Do you have a question about the ALL168500 and is the answer not in the manual?
Questions and answers