Allnet ALL-VPN10 User Manual page 38

will be displayed accordingly. A policy document is an editable text document. It may contain a destination IP users
designated. After the path for document importation has been selected, click "Import", and then at the bottom of the
configuration window click "Apply". The device will then dispatch the traffic to the assigned destination IP through the
WAN (ex. WAN 1) or WAN grouping users designated to the Internet.
To build a policy document users can use a text-based editor, such as Notepad, which is included with Windows
system. Follow the text format in the figure below to key in the destination IP addresses users want to assign. For
example, if the destination IP address range users want to designate is 140.115.1.1 ~ 140.115.1.255, key in 140.115.1.1
~ 140.115.1.255 in Notepad. The next destination IP address range should be keyed in the next line. Attention! Even if
only one destination IP address is to be assigned, it should follow the same format. For example, if the destination IP
address is 210.66.161.54, it should be keyed in as 210.66.161.54~210.66.161.54. After the document has been saved
(the extension file name is .txt), users can import the IP range of self-defined strategy.
Note!
China Netcom strategy and self-defined strategy can coexist. However, if a destination IP is
assigned by both China Netcom strategy and self-defined strategy, China Netcom strategy will
take priority. In other words, traffic to that destination IP will be transmitted through the WAN
© ALLNET GmbH München 2013 - All rights reserved
ALL-VPN10 VPN/Firewall WLAN-N WAN Router
38