Allnet ALL-VPN10 User Manual page 27

Enable Line-Dropped
Scheduling
Line-Dropped Period
Line-Dropped
Scheduling
Backup Interface
After the changes are completed, click "Apply" to save the configuration, or click "Cancel" to leave without
making any changes.
PPPoE
This option is for an ADSL virtual dial-up connection (suitable for ADSL PPPoE). Input the user connection name
and password issued by ISP. Then use the PPP Over-Ethernet software built into the device to connect with the
Internet. If the PC has been installed with the PPPoE dialing software provided by ISP, remove it. This software will no
longer be used for network connection.
The WAN disconnection schedule will be activated by checking this option. In some
areas, there is a time limitation for WAN connection service. For example: the optical
fiber service will be disconnected from 0:00 am to 6:00 am. Although there is a
standby system in the device, at the moment of WAN disconnection, all the external
connections that go through this WAN will be disconnected too. Only after the
disconnected lines are reconnected can they go through the standby system to
connect with the Internet. Therefore, to avoid a huge number of disconnection, users
can activate this function to arrange new connections to be made through another
WAN to the Internet. In this way, the effect of any disconnection can be minimized.
Input the time rule for disconnection of this WAN service.
Input how long the WAN service may be disconnected before the newly added
connections should go through another WAN to connect with the Internet.
Select another WAN port as link backup when port binding is configured. Users should
select the port that employs the same ISP.
© ALLNET GmbH München 2013 - All rights reserved
ALL-VPN10 VPN/Firewall WLAN-N WAN Router
27