Allnet ALL-VPN10 User Manual page 33

Enable Line-Dropped
Scheduling
Line-Dropped Period
Line-Dropped
Scheduling
Backup Interface
After the changes are completed, click "Apply" to save the configuration, or click "Cancel" to leave without
making any changes.
The WAN disconnection schedule will be activated by checking this option.
In some areas, there is a time limitation for WAN connection service. For
example: the optical fiber service will be disconnected from 0:00 am to
6:00 am. Although there is a standby system in the device, at the moment
of WAN disconnection, all the external connections that go through this
WAN will be disconnected too. Only after the disconnected lines are
reconnected can they go through the standby system to connect with the
Internet. Therefore, to avoid a huge number of disconnection, users can
activate this function to arrange new connections to be made through
another WAN to the Internet. In this way, the effect of any disconnection
can be minimized.
Input the time rule for disconnection of this WAN service.
Input how long the WAN service may be disconnected before the newly
added connections should go through another WAN to connect with the
Internet.
Select another WAN port as link backup when port binding is configured.
Users should select the port that employs the same ISP.
© ALLNET GmbH München 2013 - All rights reserved
ALL-VPN10 VPN/Firewall WLAN-N WAN Router
33