52 Using the Terminal menu
4
5
6
7
8
9
10
Viewing and editing the default volume
Follow this procedure to change the default volume of the handset,
headset, handsfree speaker, ringer, or buzzer.
Copyright © 2008 Nortel Networks
.
If you do not have permission to edit your audio profile, only one
profile appears. This is your Audio profile.
The procedure is finished.
If you do have permission to edit your audio profile, press Ok on
the Local Area Network screen.
The Audio menu opens.
Press the down navigation key to select an item: Profile, or
Default Volumes.
If you select Profile, press Ok.
The profile is selected and you return to the Terminal menu.
The procedures is finished.
If you select Default Volumes, another menu opens; perform one
of these steps:
•
Select Handset.
•
Select Headset.
•
Select Handsfree.
•
Select Help.
Press Ok.
If you selected Handset, Headset, or Handsfree, another menu
opens.
Perform one of these steps:
•
Increase
•
Decrease
•
Apply
•
Default
•
Help
Select the audio profile you want, and press Ok.
Your audio profile changes and a check mark appears beside it.
You return to the Audio Profile screen.
Carrier VoIP
Nortel IP Phone 2001 User Guide (CICM)
NN10300-005 09.01 Standard
4 July 2008
--End--