Show Sntp - D-Link X-STACK DES-3200 SERIES Reference Manual
Hide thumbs
Also See for X-STACK DES-3200 SERIES:
- Reference manual (531 pages) ,
- Installation manual (68 pages) ,
- Hardware installation manual (60 pages)
Table of Contents
Advertisement
®
xStack
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
DES-3200-28P:admin#config sntp primary 10.1.1.1 secondary 10.1.1.2 poll-
interval 30
Command: config sntp primary 10.1.1.1 secondary 10.1.1.2 poll-interval 30
Success.
DES-3200-28P:admin#
70-2
show sntp
Description
This command is used to display SNTP current time source and configuration.
Format
show sntp
Parameters
None.
Restrictions
None.
Example
To show SNTP:
DES-3200-28P:admin#show sntp
Command: show sntp
Current Time Scource
SNTP
SNTP Primary Server
SNTP Secondary Server : 10.1.1.2
SNTP Poll Interval
DES-3200-28P:admin#
70-3
enable sntp
Description
This command is used to turn on SNTP support.
Format
enable sntp
: System Clock
: Disabled
: 10.1.1.1
: 30 sec
596
Advertisement
Chapters
Table of Contents
