D-Link X-STACK DES-3200 SERIES Reference Manual page 504

®
xStack DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
Parameters
<priority 0-7> - The 802.1p user priority you want to associate with the <class_id> (the number
of the hardware queue) with.
<class_id 0-7> - The number of the Switch's hardware priority queue. The switch has 8 hardware
priority queues available. They are numbered between 0 (the lowest priority) and 7 (the
highest priority).
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure the 802.1p user priority:
DES-3200-28P:admin#config 802.1p user_priority 1 3
Command: config 802.1p user_priority 1 3
Success.
DES-3200-28P:admin#
57-10 show 802.1p user_priority
Description
This command is used to display 802.1p user priority for ports.
Format
show 802.1p user_priority
Parameters
None.
Restrictions
None.
Example
To display the 802.1p user priority:
500