D-Link X-STACK DES-3200 SERIES Reference Manual page 8

®
xStack DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
DES-3200-28P:admin#config account
Command: config account
Next possible completions:
<username>
DES-3200-28P:admin#config account
In the above example, the command config account was entered without the required parameter
<username>, the CLI returned the Next possible completions: <username> prompt. The up
arrow cursor control key was pressed to re-enter the previous command (config account) at the
command prompt. Now the appropriate username can be entered and the config account
command re-executed.
All commands in the CLI function in this way. In addition, the syntax of the help prompts are the
same as presented in this manual − angle brackets < > indicate a numerical value or character
string, braces { } indicate optional parameters or a choice of parameters, and brackets [ ] indicate
required parameters.
If a command is entered that is unrecognized by the CLI, the top-level commands will be displayed
under the Available commands: prompt.
DES-3200-28P:admin#the
Available commands:
..
cfm
create
dir
erase
move
rd
reset
telnet
DES-3200-28P:admin#
The top-level commands consist of commands such as show or config. Most of these commands
require one or more parameters to narrow the top-level command. This is equivalent to show what?
or config what? Where the what? is the next parameter.
For example, entering the show command with no additional parameters, the CLI will then display
all of the possible next parameters.
?
clear
debug
disable
login
no
reboot
save
traceroute
4
cable_diag
config
del
download
logout
ping
reconfig
show
traceroute6
cd
copy
delete
enable
md
ping6
rename
smtp
upload