D-Link X-STACK DES-3200 SERIES Reference Manual page 558

®
xStack DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
Example
To configure the trap state for warmstart event:
DES-3200-28P:admin#config snmp warmstart_traps enable
Command: config snmp warmstart_traps enable
Success.
DES-3200-28P:admin#
63-32 show snmp traps
Description
This command is used to display the snmp trap sending status.
Format
show snmp traps {linkchange_traps {ports <portlist>}}
Parameters
linkchange_traps - (Optional) Specify that the SNMP trap sending status will be displayed.
ports - (Optional) Specify the ports for the display.
<portlist> - Enter the list of ports used for the display here.
Restrictions
None.
Example
DES-3200-28P:admin#show snmp traps
Command: show snmp traps
SNMP Traps
Authenticate Trap
Linkchange Traps
Coldstart Traps
Warmstart Traps
DES-3200-28P:admin#
63-33 config rmon trap
Description
This command is used to configure the trap state for RMON events.
: Enabled
: Enabled
: Enabled
: Enabled
: Enabled
554