D-Link X-STACK DES-3200 SERIES Reference Manual page 35

®
xStack DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
3-12 enable pvid auto assign
Description
This command is used to enable the auto-assignment of PVID.
If "Auto-assign PVID" is enabled, PVID will be possibly changed by PVID or VLAN configuration.
When user configures a port to VLAN X's untagged membership, this port's PVID will be updated
with VLAN X. In the form of VLAN list command, PVID is updated with last item of VLAN list. When
user removes a port from the untagged membership of the PVID's VLAN, the port's PVID will be
assigned with "default VLAN".
The default setting is enabled.
Format
enable pvid auto_assign
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable the auto-assign PVID:
DES-3200-28P:admin#enable pvid auto_assign
Command: enable pvid auto_assign
Success.
DES-3200-28P:admin#
3-13 disable pvid auto assign
Description
This command is used to disable auto assignment of PVID.
Format
disable pvid auto_assign
Parameters
None.
31