D-Link X-STACK DES-3200 SERIES Reference Manual page 511

®
xStack DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
57-18 show dscp map
Description
This command is used to show DSCP trusted port list and mapped color, priority and DSCP.
Format
show dscp map {<portlist>} [dscp_priority | dscp_dscp | dscp_color] {dscp <dscp_list>}
Parameters
<portlist> - (Optional) A range of ports to show. If no parameter is specified, all ports' dscp
mapping will be displayed.
dscp_priotity - Specify a list of DSCP value to be mapped to a specific priority.
dscp_dscp - Specify a list of DSCP value to be mapped to a specific DSCP.
dscp_color - Specify a list of DSCP value to be mapped to a specific color.
dscp - (Optional) This specifies DSCP value that will be mapped.
<dscp_list> - Enter the DSCP list here.
Restrictions
None.
Example
In case of project support per port configure, show DSCP map configuration on port 1.
DES-3200-28P:admin#show dscp map 1 dscp_dscp
Command: show dscp map 1 dscp_dscp
DSCP to DSCP Mapping:
--------------------------------------------------------------
Port 1 | 0
-----------+--------------------------------------------------
0 | 0
1 | 10
2 | 20
3 | 30
4 | 40
5 | 50
6 | 60
--------------------------------------------------------------
DES-3200-28P:admin#
1 2 3 4
1 2 3 4
11 12 13 14
21 22 23 24
31 32 33 34
41 42 43 44
51 52 53 54
61 62 63
507
5 6 7 8
5 6 7 8
15 16 17 18
25 26 27 28
35 36 37 38
45 46 47 48
55 56 57 58
9
9
19
29
39
49
59