D-Link X-STACK DES-3200 SERIES Reference Manual page 211

Hide thumbs Also See for X-STACK DES-3200 SERIES:
Table of Contents

Advertisement

®
xStack
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
Format
config dhcp_relay option_60 delete [string <multiword 255> {relay <ipaddr>} | ipaddress
<ipaddr> | all | default {<ipaddr>}]
Parameters
string - Delete all the entries whose string is equal to the string of specified if ipaddress is not
specified
<multiword 255> - Enter the DHCP option 60 string to be removed here. This value can be
up to 255 characters long.
relay - (Optional) Delete one entry, whose string and IP address are equal to the string and IP
address specified by the user.
<ipaddr> - Enter the IP address used for this configuration here.
ipaddress - Delete all the entry whose ipaddress is equal to the specified ipaddress.
<ipaddr> - Enter the IP address used for this configuration here.
all - Delete all the entry. Default relay servers are excluded.
default - Delete the default relay ipaddress that is specified by the user.
<ipaddr> - (Optional) Enter the IP address used for this configuration here.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To delete the DHCP relay option 60 string called 'abc':
DES-3200-28P:admin#config dhcp_relay option_60 delete string "abc" relay
10.90.90.1
Command: config dhcp_relay option_60 delete string "abc" relay 10.90.90.1
Success.
DES-3200-28P:admin#
20-15 show dhcp_relay option_60
Description
This command is used to show DHCP relay option 60 entry by the user specified.
Format
show dhcp_relay option_60 {[string <multiword 255> | ipaddress <ipaddr> | default]}
Parameters
string - (Optional) Show the entry which's string equal the string of specified.
<multiword 255> - Enter the entry's string value here. This value can be up to 255 characters
long.
ipadddress - (Optional) Show the entry whose IP address equal the specified ipaddress.
<ipaddr> - Enter the IP address here.
default - (Optional) Show the defaut behaviour of DHCP relay option 60.
If no parameter is specified then all the DHCP option 60 entries will be displayed.
207

Advertisement

Table of Contents
loading

Table of Contents